Installation Instructions

For sales order BRU0620

Hi Bruce,

Congratulations!  You'll be the first to install onto a RIO without being installed "from the factory", and we're hoping for smooth sailing.

Feel free to give me a call at 425 268-8713 if you want me to walk through this with you.

  1. Install the Microclimates HMI software
    • Login to the RIO and open the Node-RED editor
    • Paste the following from your clipboard into Node-RED. It contains the install command:
      [{"id":"b612bb.a64ced48","type":"inject","z":"1b6a7d59.767c43","name":"Trigger","topic":"","payload":"","payloadType":"str","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":110,"y":80,"wires":[["d01870ed.b25b"]]},{"id":"d01870ed.b25b","type":"exec","z":"1b6a7d59.767c43","command":"cd ~/.node-red; npm install --save --registry= mc-controller-iq@1.1.5 mc-controller-hmi@1.1.5 mc-controller-device@1.1.6 sxc-climate-sensor@1.1.8 rx4i-power-switch@1.1.7 mc-grownet@1.2.6 node-red-contrib-state@1.5.0; killall node-red","addpay":false,"append":"","useSpawn":"false","timer":"","oldrc":false,"name":"Install Controller-IQ","x":290,"y":80,"wires":[["5dafb11a.a5c6a"],["5dafb11a.a5c6a"],["5dafb11a.a5c6a"]]},{"id":"5dafb11a.a5c6a","type":"debug","z":"1b6a7d59.767c43","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","x":490,"y":80,"wires":[]}]
    • Click the Install button. This will take a minute or two, and will restart Node-RED.
    • Refresh your Node-RED browser once it's restarted.
  2. Add your devices to Node-RED
    • Create a new HMI Cards tab in Node-RED
    • Drop a controller node onto the palette
    • Drop a climate node onto the palette
    • Drop two RX4i Relay nodes onto the palette
    • Press Deploy
  3. Select the Controller node, and click the link to open the UI
    • You should see the HMI. Change the site name, and configure your devices