June 2022
Version 2022-6-11
Published July 03, 2022
Saved Tasks
All cards that can run tasks now let you save task configurations with a name as a custom task.
Once the task is saved, it can be selected by name as a custom task.
Timed Dosing
The Nutrient Pump and Nutrient Panel cards have a new task Issue a Timed Dose, letting you deliver a fixed amount of nutrients in a single task.
This task allows you to select the amount of each nutrient to deliver (in seconds), and if you want the nutrients delivered one at a time or all at once.
It’s an easy way to manually deliver nutrients for adjusting pH and/or EC levels.
Secondary Sensors - Nutrient Panel
The Nutrient Panel card can now accept multiple sensors of a given type to add protection against sensor failures.
When adding additional sensors of a given type, a section appears allowing you to enter both warning and alert tolerance ranges.
If any secondary sensor differs from the primary sensor by more than these tolerances, the card will be placed into either the warning or alert state.
Improved Single-Tank Logic for Nutrient Panel
The Nutrient Panel card was written to manage multiple water tanks, with flushing sequences to prevent cross-tank contamination.
In single tank configurations, valve management and flushing are not necessary. This release relaxes the logic requiring valves to be defined for multi-tank operations, providing improved value for single-tank operations.
Pause for a Period
A new task Pause for a Period has been added to all cards that can run tasks.
This task causes the card to pause for a specified number of minutes and seconds before running the next task.
It is useful when placed between a list of tasks to run, causing a timed pause between the tasks.
Agrowtek SXOM - Optical Dissolved O2 Sensor
This release includes an integration with the Agrowtek SXOM Optical Dissolved Oxygen Sensor.
Agrowtek DXI8 - 8 Port Input Device
This release includes an integration with the Agrowtek DXI8 DC Input Module
Agrowtek DXV4 - 4 Port 0-10v Output Device
This release includes an integration with the Agrowtek DXV4 4 Port 0-10v DC Output Module
Irrigation Tank Sensor Ordering
The front irrigation tank card listed the sensor readings in a different ordering from the readings on the MDX water sensing panel.
We have re-arranged the ordering so the water temperature is on top, the pH reading is in the middle, and the EC reading is at the bottom, so the Tank card matches the MDX card.