Welcome to Microclimates
In this video you will learn some details about the Irrigation & Tank Management Card
First off, on the front of the card you can find information on the current water level of the irrigation tank, the temperature, the pH, and the Electrical Conductivity level.
Let's look at the settings on the back of the card:
Here, you can set the card and controlling device to be in service or not.
You can select which zone or group this card belongs to here.
In the tank capacity tab, you can set the maximum capacity and alter the unit of measurement used.
In the water level tab, you can select which recognized sensor to pair to this card and calibrate it as well by entering values for the sensor readings to calibrate to.
In the Fluid level, pH, EC, and Temperature alerts tabs, you can specify which high and low values for each measurement type will trigger the card to send alerts to you.
In the filling, draining, and irrigation tabs, you can select the valve relays, pump relays, pressure sensors, and flow sensors to be used when filling or draining your tanks.
Next, you can view and add an alert for this card here. After clicking add an alert, you can set it to be enabled or disabled, choose an alert type, determine if it is a warning or critical, and add both a subject and message to the alert. You can even add notes to this alert if you like. After editing your alert, be sure to save it and it will appear in this list.
Here, you can view your connected cards. You can also add one. Determine if the new connection is inbound or outbound, choose what your card is connecting to, set what it is triggered by, set what other conditions this connection has, and configure any delays.
This is where you can publish your card for your Internet of Things.
The tags tab is where you can set tags for your card which makes finding it easier through our filtering system.
Here, you can configure a connection to a QR code.
Finally, this is where you can add notes to your card.
Once you are finished editing these settings for your card, be sure to save your edits and the card will flip back over so you can continue monitoring.
Now you know the features of your Irrigation & Tank Management card as well as how to configure it's settings.