Irrigation & Tank Management: Setup & Configuration Welcome to Microclimates In this video you will learn some details about the Irrigation Tank Management Card First off, on the front of the card you can find information on the current water level of ...
Getting Started with Grafana Dashboards What is Grafana? Grafana is the industry-standard visualization engine for real-time data. While EnvOS provides built-in monitoring, EnvOS Insights dashboards are actually powered by Grafana under the...
Setting Up 2-Factor Authentication At Microclimates, the security of your data is our top priority. To provide an extra layer of protection for your account, we support Two-Factor Authentication (2FA) . What is Two-Factor Authenticatio...
S2103 Battery Replacement Guide In this quick start guide you will learn how to dismantle, replace the battery, and reassemble your SenseCAP S2103 Temperature/Humidity/CO ₂ sensor. Step 1: What You Need Gather your S2103 sensor, an ...
Set Up Daily Light Integral (DLI) In a minute you’ll learn how to use the Daily Light Integral, also known as DLI. Let’s get started. The daily calculator is located on the microclimates.com website. From here you can go ahead input y...
Set Wireless Sensor Reading Intervals Introduction In this video, you’ll learn how to adjust your wireless sensor’s reporting interval to help extend battery life. Let’s get started. Log into your site and go to your Device Cards. Find th...
Use the Energy Application Welcome to Microclimates. At Microclimates, we know energy is one of your most valuable and costly resources as a grower. That’s why we created the Energy Application Suite, which gives growers total ...
Device vs Monitor Card Alerts Welcome to microclimates. In this video, we’ll show you when to set alerts at the device level versus at the monitor control or automation levels. So you can protect both your equipment and your envir...
Verify Wireless Sensors Before Deployment Welcome to Microclimates. In this video, we’ll show you how to verify that your wireless sensors are successfully communicating with the microclimates Environmental Operating system before installing ...
Provision Seeed Studio Sensors Welcome to microclimates. In this video, you’ll learn how to configure a Sensecap sensor by Seed Studio and add it to your microclimate system. Let’s get started. First, you’ll need to download the Se...
Connect Agrowtek Devices In this video you will learn how to link an Agrowtek device to a card. First, click this button to bring up the card selector menu. Next, search for the Agrowtek card you wish to add which corresponds...
Activate Dragino Devices In this video you will learn how to activate, deactivate, and test the uplink status of your Dragino LoRaWAN devices. First, locate the ACT button on your device. In most cases, it will be located nex...