Connect a Device Card to a Monitor Card In this video you will learn how to connect the Microclimates Inc. device card to a monitor card. Once the device card has been connected and able to represent digital data on your sensor, you will ne...
Use the Lighting Application Welcome to Microclimates. Managing light is no longer a guessing game. With Microclimates intelligent lighting application, growers gain precision control over every photon their plants receive. In th...
Set Wireless Sensor Reading Intervals Introduction In this video, you’ll learn how to adjust your wireless sensor’s reporting interval to help extend battery life. Let’s get started. Log into your site and go to your Device Cards. Find th...
Connecting TP-Link Router Step 1: What is Inside the Box? 1. TL-WR702N Nano Router 2. Cat-5 Ethernet Cable 3. Power Cable 4. Outlet Power Adapter Step 2: Connecting the Device 1. While in range of a WiFi network with a known p...
Provision Seeed Studio Sensors Welcome to microclimates. In this video, you’ll learn how to configure a Sensecap sensor by Seed Studio and add it to your microclimate system. Let’s get started. First, you’ll need to download the Se...
Connect Dragino Devices In this video you will learn how to link a Dragino device to a card. First, click this button to bring up the card selector menu. Next, search for the Dragino card you wish to add which corresponds to...
Device vs Monitor Card Alerts Welcome to microclimates. In this video, we’ll show you when to set alerts at the device level versus at the monitor control or automation levels. So you can protect both your equipment and your envir...
Verify Wireless Sensors Before Deployment Welcome to Microclimates. In this video, we’ll show you how to verify that your wireless sensors are successfully communicating with the microclimates Environmental Operating system before installing ...
Calibrating a Sensor From a Card In this video, you will learn how to calibrate a sensor based on reference sensor values. First, filter your cards to find the sensor card you wish to calibrate. Next, flip over the card. Then navigat...
Add an Agrowtek GrowNET Network In this video, you’ll add an Agrowtek GrowNet network using Modbus IP, and then onboard your first sensor. Before you get started you will need your IP address for the Modbus converter. This can be ob...
Calibrating a Sensor From a Card In this video, you will learn how to calibrate a sensor based on reference sensor values. First, filter your cards to find the sensor card you wish to calibrate. Next, flip over the card. Then navigat...
Filter Cards by Tags and Zones In a minute, you’ll learn how to customize your dashboard by adding zones, tags and also filtering your cards. Let’s get started. Log on to microclimates.com using your user ID and password. Once you’...